Geomechanics Related Papers

Bruno, M.S., Dorfmann, L., Han, G., Lao, K., and Young, J.T. (2005):  "3D Geomechanical Analysis of Multiple Caverns in Bedded Salt",  Proceedings of the Solution Mining Research Institute Fall, 2005, Mtg., October 1-5, Nancy, France.
Bruno, M., Han, G., Honegar, C., “Advanced Simulation Technology for Combined Percussion and Rotary Drilling and Cuttings Transport”, in Gas TIPS, Winter 2005.
Bruno, M.S.,Dusseault, M.B. Geomechanical Analysis of Pressure Limits for Thin Bedded Salt Caverns Solution Mining Research Institute, Spring 2002 Technical Meeting Banff, Alberta, Canada, April 29-30, 2002
Bruno, M.S., Geomechanical Analysis and Decision Analysis for Mitigating Compaction Related Casing Damage SPE 71695 Proc. 2001 SPE Annual Tech. Conference New Orleans, Louisiana September 30 - October 3, 2001
Bruno, M., Dorfmann, A., Lao, K., Honeger, C., Coupled particle and fluid flow modeling of fracture and slurry injection in weakly consolidated granular media Proc. 38th US Rock Mech. Sym., DC Rocks 2001, Washington D.C. July 7-10 2001
Bruno, M.S., Dewolf, G., and Foh, S. (2000): Geomechanical analysis and decision analysis for delta pressure operations in gas storage reservoirs, Proc. AGA Operations Conf., Denver, CO, May 7-9.
Bruno, M.S., Dusseault, M.B., Balaa, T.T., Barrera, J.A. , Geomechanical Analysis of Pressure Limits For Gas Storage Reservoirs, Paper USA-328-5, presented at the North American Rock Mechanics Symposium, NARMS '98, June 3-5, 1998
Bruno, M.S. and Winterstein, D.F., Some influences of stratigraphy and structure on reservoir stress orientation, Geophysics, Vol. 59 (6), pp. 954-962, 1994.
Bruno, M.S. and Nakagawa, F.M., Pore pressure influence on tensile fracture propagation in sedimentary rock, Int. J. Rock Mech. & Min. Sci. V28 (4), pp. 261-273, 1991.
Dusseault, M.B., Bilak, R.A. and Rothenburg, L., Inversion of surface displacements to monitor in-situ processes, Int. J. Rock Mech. & Min. Sci, Vol. 30, pp. 1219-1222, 1993.
Dusseault, M.B., Bruno, M.S., Barrera, J.A., Casing Shear: Causes, Cases, Cures SPE Drilling & Completion Vol.16 Num. 2 98-107, June 2001
Han, G., Bruno, M., Lao, K., “Percussion drilling in oil industry: review and rock failure modeling”, in AADE-05-NTCE-59, the AADE National Technical Conference & Exhibition, Houston , Texas , USA , April 5-7, 2005.
Han, G., Bruno, M., Lao, K., Young, J., Dorfmann, L., May 15-18, 2006.  Gas storage and operations in single bedded salt caverns: stability analyses, SPE 99520, SPE Gas Technology Symposium, Calgary, AB, Canada.
Han, G., Bruno, M., and Grant, T., June 17-21, 2006.  Lab investigations of percussion drilling: from single impact to full scale fluid hammer, ARMA/USRMS 06-96, The 41st US Rock Mechanics Symposium, Colorado School of Mines, Golden, CO, USA.
Han, G., Bruno, M., and Dusseault, M.B., “How much oil you can get from CHOPS”, in Canadian International Petroleum Conference, paper 2004-008, Calgary , Canada , June 2004.
Han, G., Bruno, M., Dusseault, M.B.. “Dynamic analyses of rock failure during repetitive percussion drilling” in ARMA/USRMS 05-819, The 40 th US Rock Mechanics Symposium , Anchorage , Alaska , USA , Jun 25-29, 2005 .
Han, G., Dusseault, M.B., and Cook, J., “Why sand fails after water breakthrough. Gulf Rocks 2004: Rock Mechanics across Borders & Disciplines”, in the 6th North American Rock Mechanics Symposium , NARM04-505, Houston , TX , USA , Jun 2004.
Han, G., Dusseault, M.B., and Cook J., “Quantifying the behaviors of rock capillary strength in unconsolidated sand”, in SPE78710, Proceedings of the 2002 SPE/ISRM Rock Mechanics Conference, Irving, TX, USA, Oct 2002.
Hongxue, Han, Dusseault, M.B., Baoci, Xu, Peng,B. (2006), “Simulations of Tectonic Deformation and Large Area Casing Shear Mechanisms”, ARMA/USRMS 06-1004, The 41st US Symposium on Rock Mechanics, Golden, Colorado, June 17 – 21, 2006

Subsidence Related Papers

Bruno, M.S., (1997): Identifying Source Mechanisms Responsible for Subsidence Through Inversion of Measured Surface Displacements, Current Research and Case Studies of Land Subsidence, J. Borchers (ed), in print, by Association of Engineering Geologist, 1997.
Bruno, M.S. and Bilak, R.A., (1994): Cost-effective monitoring of injected steam migration using surface deformation analysis,  SPE 27888, Proc. West. Reg. Mtg. of the Soc. Pet. Eng., March 23-25, 1994, pp. 397-411
Bruno, M.S. and Bovberg, C.A. (1992): Reservoir compaction and surface subsidence above the Lost Hills Field, California, Proc. 32nd US Symp. Rock Mech., Santa Fe, N.M., June 3-5, pp. 263-272.
Bruno, M.S. (1992): Subsidence-Induced Well Failure, SPE Drilling Engineering, June, 1992, pp. 148-152.
Fredrich, J.T., Arguello, J.G., Thorne, B.J., Wawersik, W.R., Deitrick, G.L., de Roufignac, E.P., Myer, L.R. and Bruno, M.S., (1996): Three-dimensional geomechanical simulation of reservoir compaction and implications for well failures in the Belridge Diatomite, SPE 36698, Proceedings of the 1996 SPE Ann. Mtg, Denver, Colorado, October 6-9, pp. 195-209.
Hilbert, L.B., Fredrich, J.T., Bruno, M.S., Deitrick, G.L., and de Rouffignac, E. P., (1996): Two-dimensional nonlinear finite element analysis of well damage due to reservoir compaction, well-to-well interactions, and localization on weak layers, Proc. of the 2nd North Am. Rock Mech. Symp., Quebec, Canada, 19-21, June, 1996, pp. 1863-1870.
Copyright © 2014 Terralog Technologies Inc.
Developed by John Prudence - Artyfacts Canada
SFI™, Slurry Fracture Injection™, TTI™, Terralog™, and SFI-Slurry Fracture Injection™ are trademarks of Terralog Technologies Inc.
Go to Top